So you’ve just unboxed your Hypershell X exoskeleton, ready to take on the world with superhuman strides. Then you run into a hiccup. Maybe the app won’t connect, the device won’t power up, or things just feel a little… off.

Don’t worry. You’re not alone, and most common issues are quick and easy to solve. Whether you're a first-time user or just need a refresher, this guide walks you through the top FAQs and troubleshooting tips to get your Hypershell X running smoothly again.

Can’t Connect to the Hypershell+ App?

If your app can’t detect the device or Bluetooth pairing keeps failing, the fix is usually straightforward. Start by making sure you’ve downloaded the latest version of the Hypershell+ App from your app store. On your phone, check that Bluetooth, location services, and nearby device access are all turned on.

Next, observe your Hypershell X’s LED indicator. A waving blue light means the device is in pairing mode. A solid blue light means the connection is successful. A blinking red light usually indicates a low battery, while no light at all suggests the device is powered off.

Open the app, head to the Devices section, and tap on “Add Device” while staying within two meters of the exoskeleton. If you’ve previously connected to another phone, be sure to forget the Hypershell device from your Bluetooth settings and restart both your phone and the exoskeleton.

If problems continue, try a factory reset through the app by going to Settings > Device > Factory Reset. You can also test the pairing on another phone to check for hardware or software compatibility issues. If none of these steps work, reach out to our support team with screenshots, your phone model, order number, and the device’s serial number.

The Device Freezes Mid-Walk

If the Hypershell X suddenly stops working while you’re walking, even though everything seems fine, the issue may be related to Hill Descent Control (HDC). Even if it appears off, HDC might still be running in the background.

To resolve this, make sure your app is updated to version 1.4.3 or later. Open the app and manually switch off HDC. Then perform a factory reset and reinstall the latest firmware from the app. If the problem persists after these steps, please contact customer support. Your device may require a replacement.

Charging Troubles?

If your exoskeleton is charging slowly or not at all, the most common reason is the use of incompatible charging equipment. For best results, use a 65W Power Delivery (PD) charger with a compatible USB-C cable. Chargers and cables that don’t support PD will cause slower charging speeds or prevent charging entirely.

If the device won’t power on even after charging, make sure the battery is properly inserted until it clicks in place. Press and hold the power button for two seconds to turn it on. If that doesn’t work, try holding the button for eight to ten seconds for a deep reset. Watch the LED indicator for signs of life. A flowing white light means the device is charging, solid white means it’s fully charged, and blinking red indicates a low battery. If there’s no light at all, try another charger, USB-C cable, or even a different battery. If none of these solutions help, contact support with photos or videos of the issue along with your serial number.

The Exoskeleton Isn’t Activating

If the device powers on but doesn’t activate, make sure the battery is fully charged and correctly inserted. Confirm that Bluetooth pairing was successful through the app. Most importantly, check that all the straps are properly fastened and that you’re wearing the exoskeleton correctly. If the fit is off, the system may prevent activation as a safety measure.

The Device Feels Too Sensitive

If the motion feels jerky or too reactive, open the Hypershell+ App and go to the motion settings. Start with a lower assist level and slowly adjust upwards until you find the right balance. If sensitivity still feels off, your device may need recalibration. Reach out to support for next steps.

The Power Indicator Won’t Light Up

If there’s no response when you try to power on the device, double-check that the battery is seated correctly. Use a PD-certified charger with at least 65W output and swap out the USB-C cable if needed. Check for any dust or debris in the charging port. If you have access to another Hypershell battery or device, cross-test them to isolate the issue.

How to Discharge the Battery Manually

To manually discharge the battery, connect an external device to your Hypershell X using a USB-C cable. In the Hypershell+ App, go to MotionEngine > External Battery Discharge and enable the feature. While this can be useful, avoid draining the battery completely too often, as it can shorten the battery’s overall lifespan.

Finding Your Serial Number

You’ll need your device’s serial number if you ever contact support. You can find it on the sticker located on your product box or within the app under Device Info.

Updating the Firmware

Your app will usually notify you when a firmware update is available. You can also check manually by going to Device Settings > Firmware Update. During the update, keep the device idle and ensure it remains connected. The process typically takes between two and five minutes. Once complete, the app will confirm the successful update, and the notification will disappear.

Testing the Device After Setup

Once everything’s in place, do a quick functionality test. Start by checking the fit and fastening all straps securely. Power on the device, then take a few steps to see how it responds. Look out for LED feedback and slight vibrations, which indicate normal operation.

Switching Modes and Adjusting Power

You can switch between different assist modes—Hyper, Eco, Transparent, and Adaptive—through the app. Power levels can be increased by double-clicking the control button and decreased by triple-clicking. Adaptive mode is a great option for dynamic support, as it adjusts assistance levels based on your movement in real time.

What Is Exclusive Device Lock?

Exclusive Device Lock adds a layer of security to ensure only your account can connect to your Hypershell. You can enable it through the app under My Profile > My Device > Exclusive Device Access. When the lock is activated, a lock icon will appear in the device panel. If you encounter any issues while it’s locked, try rebooting or reconnecting the device.

Understanding Your Account

There are two separate systems for managing your Hypershell experience. Your app account controls device settings and performance, while your store account manages orders and purchase information. If you forget your password, simply tap “Forgot Password” on the login screen and follow the prompts to reset it.

Still Need Help?

If you’ve tried everything and something still doesn’t feel right, our support team is here for you. To speed things up, please include your serial number, order number, phone model, app version, and any screenshots or videos of the issue when you reach out.

You’re All Set

Your Hypershell X is built to enhance your movement and redefine what your body can do. Like any advanced piece of technology, it may take a few tweaks to get everything running perfectly. We hope this guide helps you resolve any initial bumps so you can get back to doing what you love with a little extra power.